Cladco Profiles 32/1000 Box Profile Sheeting gives a robust strength with a thickness of 0.7mm. Otherwise known as single skin box profile sheets, these roofing sheets incorporate 6 profiles of 200mm pitch across the width of the sheet with 32mm height and 1 metre actual cover when lapped. Made from a steel strip and coated in polyester paint, available in a range of different colours to suit your project. 

Please note polyester paint finishes can be easily scratched, take care when handling / installing.

Our 0.5mm thick single skin box profile PVC roof sheets give robust strength roofing sheets. Incorporating 6 profiles of 200mm pitch across the width of the sheet and 32mm profile height the roofing sheets work in both a domestic and a commercial environment.

Our 0.7mm thick single skin box profile PVC roof sheets give robust strength roofing sheets. Incorporating 6 x 200mm pitched profiles across the width of the sheet and 32mm profile height the roofing sheets work in both a domestic and a commercial environment. Available in a range of colours to suit your project

Our steel roof corrugated sheets give the look of a traditional 13/3 ‘corrugated iron cladding’ profile, and has 13 corrugations of 3 inch/76mm round, with a width coverage of 990mm when installed. This sheet gives the look of traditional ‘corrugated iron cladding’ that has been used for over a century for a traditional look. Corrugated cladding is available in a range of colours and 0.5 and 0.7mm thickness, with a polyester paint coat on top of the galvanised steel. Please note, we advise using the 65mm Screw with Baz Washer with these sheets.

Our steel corrugated roof sheets give the look of a traditional 13/3 ‘corrugated iron’ profile and have 13 corrugations of 3 inch/76mm round, with a width coverage of 990mm when installed. These corrugated roof sheets really do give the look of traditional ‘corrugated iron’ that has been used for over a century. Corrugated roof sheet profiles are available in a range of colours and 0.5 and 0.7mm thickness, with a polyester paint coat on top of the galvanised steel.

We advise the use of TEK screws with BAZ washer on our corrugated sheets as the BAZ washer creates a seal.

Giving the look of a traditional 13/3 ‘corrugated sheet iron’ profile, our steel corrugated roof sheets have 13 corrugations of 3 inch/76mm round and each corrugated sheet will cover a width of 990mm when installed. Corrugated roof sheets really do give the look of traditional ‘corrugated sheet iron’ that has been used for over a century. Corrugated steel roof sheets are available in a range of colours and 0.5 and 0.7mm thickness, with a PVC Plastisol coat on top of the galvanised steel corrugated roofing. Please note, we advise using the 65mm Screw with Baz Washer with these sheets. 

Often referred to as tile effect roofing sheets, these Tile form roof tile sheets are designed to look like an authentic pan tile roof. Made from the best quality steel available, our Tile form metal sheets really do give the appearance of traditional clay tiles. Using 0.6mm galvanised Swedish Steel, they are formed and then given an extremely tough and hard-wearing Mica coat on the external face. With its profile height of 41mm, each pantile roof sheets cover a width of 1,000mm when installed and is available in either Copper Brown or Graphite Grey.