Tile Form

Often referred to as Tile Effect Roofing Sheets, these Roof Tile Sheets are designed to replicate the appearance of an authentic pan tile roof. Manufactured from high-quality steel, these Metal Tile Effect Sheets provide the look of traditional clay tiles with the durability and strength of modern materials.

 

Produced using 0.7mm galvanised Swedish Steel, these sheets are coated with GreenCoat® Pural BT - a tough, hard-wearing finish designed for long-lasting performance. Flashings are available in matching coatings and colours to ensure a seamless finish for your project.

Used at the apex of your roofing to join the two sides together, Cladco ridge cover flashings are folded to a 130-degree angle and will flex 10 – 15 degrees either way, depending on your roof’s angle. Ridge cover flashings are an important component in any profiled clad apex roof and these GreenCoat® Pural ridge cover flashings are available in slate grey, nordic night black, and copper brown colours to match your roofing sheets.

Ridge pieces are used at the apex of the roof to join the two sides together. Cladco Ridges are folded to a 130-degree internal angle and will flex 10 – 15 degrees either way, dependent on the angle of your roof. Ridges area major component in any profiled clad apex roof and as they are available in a range of colours and finishes to match our roof sheets, they will enhance the aesthetics of any building.

Sometimes referred to as verges, roof edge barge flashings can be used at the end of a run of sheets and will seal off the edge. A vital part of any profiled clad roof, metal roof barge flashing helps to weatherproof a building and add an aesthetically pleasing element to your finished roof project.

These metal roof barge flashings are available in 150mm x 150mm, made from GreenCoat® Pural BT and will match or contrast the look of your roof, depending on the look you’re after, available in nordic night black, slate grey, and copper brown. You can secure them to your roofing using stitching screws and will need to allow for an overlap of a minimum of 200mm when fitting end on end.

Each 90 degree Corner Flashing can be used at the end of a run of sheets to trim and seal off the edge of a roof. Steel Flashings are a vital part of any roofing or cladding project, helping to improve weatherproofing and aesthetics. Available in a range of colours to match or contrast Tile Form Roofing Sheets. Flashings are installed using 22mm Stitching Screws to the roofing sheets below. Allow a minimum 200mm overlap when fitting Corner Barge Flashings.

Finish your building with Cladco Nordic Ridge Flashings available with a GreenCoat® Pural BT coating. Nordic Ridge Flashings are installed at the top of your roofing installation to cover the ridge gap between roof sheets. Choose from three colours to match Cladco Tile Form Sheets.

Cladco 3m Drip Tray Flashings are manufactured from high-quality galvanised steel with a GreenCoat® Pural BT coated finish and are used to provide an effective water run-off system for your roof. Available in all Cladco PVC, Polyester and GreenCoat® Pural Coatings and Colours.

GreenCoat® Pural Abutment Flashings are made in 3m lengths from high-quality, coated steel. Complete the internal edge of a lean-to building, for example, with matching profiled Roofing Sheets. These Flashings are designed to flex 10-15 degrees either way from 110-degrees, and available in a choice of three colours: Nordic Black, Slate Grey and Copper Brown.

For a reliable waterproof adhesive sealant solution that provides strong, durable bonds for your roofing project, look no further than our Cladco High Strength Adhesive Sealant (290ml). This easy-to-use adhesive is perfect for a wide range of roofing applications, such as securing Metal Roof Flashings and repairing minor leaks.