More About 3m PVC Plastisol Nordic Ridge Flashings
Cladco Nordic Ridge Roof Flashing pieces are a major component in any profiled apex roof and are available in a range of colours and finishes to match our PVC Plastisol Roofing Sheets.
Cladco Nordic Ridge Flashings are manufactured to 3-metre lengths, however, we aim to accommodate your needs wherever possible if you provide us with your dimensions, we’ll do our best to get you the exact sizes you need.
Each Nordic Ridge Flashing is folded to a 130-degree internal angle and will flex 10-15 degrees each way. Flashings include a 5mm safety welt on both sides to increase the strength and finish of the material. Coverage per wing is approximately 190mm.
Custom angles can be specified using our Custom-Made Flashings service.
When installing these Flashings, allow a minimum overlap of 200mm from one Flashing piece to the next. We manufacture a variety of Flashings to customers’ requirements in 3-metre lengths. Please contact us for more information.
Flashings can be fixed to the roofing sheets using 22mm Stitcher Screws. Read our Flashings Installation Guide for more information. Nordic Ridge Flashings are designed to seal two sides of an apex roof.
Cladco Nordic Ridge Flashings are also available inPolyester Paint, Galvanised and Prelaq Mica coatings.
Please note: 195mm x 195mm Nordic Ridge Flashings provide a 190mm x 190mm coverage due to 5mm safety welt.