Uses of 0.7mm Thick Galvanised Corrugated Roofing Sheets
Cladco 0.7mm thick 13/3 Corrugated Profile Roofing Sheets offer a traditional profile for roofing installations, featuring 13 round corrugations across the width of the Sheet.
Steel Corrugated Roofing Sheets have many uses within commercial, domestic, industrial and agricultural buildings, and can be used as a single-skin roofing or corrugated side cladding.
Galvanised Corrugated Roofing Sheets provide a 990mm width coverage when lapped and can also be used to over-clad an existing roof, or as part of an insulated built-up system.
Construction with this type of Corrugated Sheeting should be undertaken down to a minimum 10-degree pitch, using self-drilling TEK Screw Fixings with BAZ Washerson the top section of the profile.
Benefits of Galvanised Corrugated Roofing Sheets
Galvanised Corrugated Sheeting is a traditional profile that is often used within roofing or side cladding projects. This profile is lightweight and easy to install without the use of complicated tools, meaning your installation process will be fast and simple. Sheets can be cut to your specific project requirements.
Each Galvanised Roof Sheet is independently tested to ensure it is in line with current CE EN 14782 requirements.
Looking for 0.5mm thickness?
See our 13/3 Corrugated 0.5 Thick Galvanised Roof Sheet
Looking for a different finish?
For PVC Plastisol see our 13/3 Corrugated 0.7 Thick PVC Plastisol Coated Roof Sheet
For Polyester Paint see our 13/3 Corrugated 0.7 Thick Polyester Paint Coated Roof Sheet