More About Standing Seam Roof Sheets Without Ribs
Crafted from pre-coated steel, Cladco Standing Seam Sheeting provides a long-lasting, durable solution for a wide range of applications, including domestic and commercial projects for both Cladding and Roofing purposes.
Standing Seam Sheets boast a fixing-free exterior. The modern aesthetic of Standing Seam is popular for domestic conversions or architectural projects. Choose our Standing Seam without ribs for a flat finish between seams once installed.
Standing Seam Sheeting comes with either a 32mm pre-folded eaves lip for a secure attachment to Eaves Flashings, or straight-cut Sheet ends for Wall Cladding. Simply select your preference from the drop-down above. Please note that the addition of an eaves lip is not required for Cladding installations.
Cladco Standing Seam Sheets are made from 0.7mm thick, SSAB Nordic quality steel using an eco-friendly GreenCoat® Pural BT coating. Our Standing Seam Sheeting is certified to BES 6001, rated A+ by the BRE Green Guide, and made from 100% recyclable materials, highlighting our commitment to sustainability.
Benefits of 30/500 Standing Seam Sheets
- Sustainable GreenCoat® Pural BT coating
- A1 fire-rated (BS EN 13501)
- CE tested to BS EN 14783:2013
- Certified to BES 6001 – responsibly sourced and BRE Green Guide A+ rated
- Made from 100% recyclable material
- Concealed fixings ensure a clean, modern appearance similar to traditional zinc roofs
- Strong water seal at pitches as low as six degrees
- Interlocking seams for quick installation
Ideal for both Roof and Wall Cladding, Standing Seam Sheets are perfect for building lean-to extensions and other architectural projects. The system supports strong Sheet joins without visible fixings, maintaining the classic Standing Seam look.
Cladco Standing Seam Sheets have a 275g/m2 galvanised zinc layer with a 50-micron thick GreenCoat® Pural BT coating. Manufactured from lightweight, recycled steel, our Standing Seam Sheeting offers excellent corrosion resistance and longevity with a lifespan of up to 40 years under normal conditions.
Each Sheet provides 500mm width coverage and can be used for both Cladding and Roofing projects, either together or separately. Alongside Flashings, you can create a resistant and sealed exterior solution.
Cladco Standing Seam Sheeting is easy to install with a range of Standing Seam Flashings and Accessories, making them ideal for completing a mono roof, dual-pitched or lean-to roof.
Looking for Standing Seam Sheets with Ribs?
See our Standing Seam Sheets with Ribs
For optimal installation, we also provide Vent 3 Pro Breathable Membrane that can be used over OSB board or plywood board. We recommend using Annular Ring Nails to secure Standing Seam Roofing Sheets and Flashings.
For a full list of tools required, and detailed installation information, please refer to our Standing Seam Installation Guide.
When turning over Standing Seam Sheets, we advise turning in a clockwise direction (facing the eaves end) to avoid damaging or creasing the Sheets.
Please note: There is an accepted tolerance of +/-10mm for Sheet lengths.
Please note: Images and colours above are used for illustration purposes only. Actual item may vary slightly from the image displayed.