About Cladco Polyester Paint Coated Nordic Ridge Flashings
Polyester Paint Coated Nordic Ridge Flashings will enhance the aesthetics of any building’s roof to provide the perfect finish. Cladco Nordic Ridge Flashings are manufactured in lengths of 3m and are available in five colours to match that of our Polyester Paint Coated Sheets.
Each Nordic Ridge has an internal angle of 130 degrees. Custom angles can be specified using our Custom-Made Flashings service. Flashings include a 5mm safety welt on both sides to increase the strength and finish of the material. Coverage per wing is approximately 190mm.
When installing these Flashings, allow a minimum overlap of 200mm from one Flashing piece to the next. We manufacture a variety of Flashings to customers’ requirements in 3-metre lengths. Please contact us for more information.
Flashings can be fixed to the roofing sheets using 22mm Stitcher Screws. Read our Flashings Installation Guide for more information. Nordic Ridge Flashings are designed to seal two sides of an apex roof.
Cladco Nordic Ridge Flashings are also available in Galvanised, PVC Plastisol and GreenCoat® Pural coatings.
These Flashings are only recommended for use with our 13/3 Corrugated, 32/1000 Box Profile and 34/1000 Box Profile Roofing Sheets.
Please note: 195mm x 195mm Nordic Ridge Flashings provide a 190mm x 190mm coverage due to 5mm safety welt.
Please note: All Juniper Green polyester sheets and flashings may exhibit slight colour variances between products. If you are looking to match to a previous or existing order, please call us on 01837 659901.
Cladco Polyester Paint Flashings are covered with a protective film. After installation or when storing in sunlight or in wet weather, make sure to peel off the film to prevent it from bonding with the coating.
