

Ridge Flashing in GreenCoat® Pural - 150 X 150mm
Used at the apex of your roofing to join the two sides together, Cladco ridge cover flashings are folded to a 130-degree angle and will flex 10 – 15 degrees either way, depending on your roof’s angle. Ridge cover flashings are an important component in any profiled clad apex roof and these GreenCoat® Pural ridge cover flashings are available in slate grey, nordic night black, and copper brown colours to match your roofing sheets.
Ridge Cover Flashings to Enhance Your Roofing
Our ridge flashings include a safety welt on the edge to increase the strength of the material and are available as a 3m length as standard. When fitting, please note you will need to allow a minimum of 200mm overlap from one ridge piece to the next. Sitting on top of the roofing sheets, the ridge flashing pieces need to be stitched to the roofing sheet below using stitching screws to ensure they are secured.
Contact us if you have any requirements for ridge flashings, we can fold most flashing shapes to a customer’s measurements to fit your roofing project.
It is advised that these Flashings are only installed alongside our 41/1000 Tile Form Roofing Sheets.
Please note: The 150 x 150 flashings give a coverage of 142 x 142 due to the 8mm welt.
Please note: The Mica coating is no longer available. This finish has now been upgraded to the new GreenCoat® Pural BT coated steel in 0.7mm thickness.

Order A Sample Pack!

Download our printable installation guide.
Download the datasheet for Ridge Flashing in GreenCoat® Pural - 150 X 150mm


Type | When? | Cost? | ||
---|---|---|---|---|
![]() |
National Delivery | Orders under £1,000 | Est. 5 working days* Roofing items 7-10 working days* |
£192.00 |
Orders over £1,000 | Est. 5 working days* Roofing items 7-10 working days* |
£96.00 | ||
Orders over £1,500 | Est. 5 working days* Roofing items 7-10 working days* |
FREE | ||
Scotland Delivery | Postcodes: PA, PH, DD, AB, IV, & KW | Est. 15 working days* Roofing items 7-10 working days* |
£360.00 | |
|
||||
![]() |
Millboard Delivery | Orders under £2,000 | Est. 5 working days* | £192.00 |
Orders over £2,000 | Est. 5 working days* | FREE | ||
|
||||
![]() |
Parcelforce Standard | (Small Parcels) | 3-5 working days* | £8.50 |
Parcelforce Standard | (Large Parcels) | 3-5 working days* | £30.00 | |
|
||||
![]() |
Sample Packs via Courier | 5 working days* | FREE |
*Please allow for public holidays and weekends (non-delivery days)
Some of our products are available for collection from our warehouses in Okehampton (Devon) and Andover (Hampshire) - This option will show at checkout, when available.
Standard collection lead time is 3-5 working days, this may vary depending on the product. If you would like to collect your order after 2 hours, please choose this option at checkout.
Please note that collections are only available from Monday-Friday, 08:00 - 17:00 & Saturday, 08:00 - 12:30 (Note: this IS the cut off time for collections, despite our closing time of 13:00)
Please Note The Following Prior To Collection:
Vehicles we can and cannot load
Cladco Profiles will only load flatbed lorries and flatbed trailers for insurance purposes. If the appropriate vehicle is not available, two people would be required for a collection.
Cladco Profiles will NOT load any vehicles with roof racks, horse boxes, cattle lorries or fixed-sided trailers. Cladco Profiles has the right to refuse loading a vehicle for any reason.
Before arranging a collection, please read our Customer Collection Notice below.

Our Okehampton HQ and Warehouses (Devon)

Our Andover Warehouses (Hampshire)








Customer Collection Notice
Please ensure you have pre-booked your collection slot before travelling to site.
When arriving to collect your order, please report to a member of our Warehouse Team who will register your arrival and locate your goods. Once ready, your items will be picked and brought to your vehicle loading area.
During busy periods, there may be a short wait while our yard team assist other customers or complete other loading tasks. We always do our best to work within your booked collection time.
We respectfully draw your attention to the following important points:
- Loading is ultimately the customer’s responsibility. While our team can assist with mechanical loading using forklifts, we cannot handball items into enclosed vehicles. Customers must ensure their vehicle is suitable and that goods are safely loaded and adequately secured before leaving the premises.
- Sharp sheeting, metal goods, and long/heavy items may pose additional handling risks. Please come prepared with high-quality protective gloves, and any appropriate protection materials to avoid damage to your vehicle or restraints (e.g. ropes or straps). The edges of roofing sheets and metal products can be extremely sharp, and care should be taken when handling.
- We strongly recommend that customers bring their own straps, ropes, or other securing materials, as we are unable to provide these at the point of collection.
- If you are unsure of your vehicle’s load capacity, we can advise the approximate weight of your order in advance. It is your responsibility to ensure your vehicle is suitable for transporting the goods safely and legally.
- Cladco will not be held liable for any damage to your vehicle or goods once they have been loaded and leave our premises. Loading assistance is provided entirely at the customer’s own risk.
Click & Collect – Pre-Booking Required
You are welcome to collect your order from either our Okehampton (Devon) or Andover (Hampshire) site. All collections must be pre-booked in advance so your items can be picked, packed and ready for you.
Please do not travel to site without a confirmed collection time, as we cannot guarantee your order will be available.
Once your items are ready, you will receive an email with a link to book your collection slot. Please note, same-day collections are not available and bookings must be made at least two hours in advance.
When you arrive, please bring your order confirmation and follow the signage to the collection area where a member of our team will assist you.