Nordic Ridge Flashings in GreenCoat® Pural Finish in 3m 195 x 195mm
If you are installing 41/1000 tile form sheets, this GreenCoat® Pural BT Nordic ridge flashing creates a neat, weathertight finish along the roof apex. Folded to 130° and able to flex 10 to 15°, it is supplied in 3m lengths with 5mm safety welts and comes in colours such as Nordic night black and tile red for a close visual match.
About Our Nordic Ridge Flashings in GreenCoat® Pural BT Finish
For a ridge detail that pairs long-term durability with a clean, architectural finish, our GreenCoat® Pural BT Nordic ridge flashing is designed specifically for 41/1000 tile form roofs. It covers the apex where both roof slopes meet, creating a secure, weather‑tight join and a tidy finishing line across the ridge of your roof.
Each flashing is folded to a 130° internal angle and can flex 10 to 15° either way, helping it sit neatly to your roof pitch. Manufactured from 0.7mm steel with a GreenCoat® Pural BT coating, it offers excellent resistance to wear and weathering, as well as long-lasting colour performance. A 5mm safety welt on each side increases rigidity and creates a precise edge profile.
Benefits of GreenCoat® Pural BT Nordic Ridge Flashings
- Creates a wider, decorative ridge detail for tile form roofs
- Flexes 10 to 15° for accurate pitch alignment
- Premium Pural BT finish for long-term durability
- Safety welt improves rigidity and edge strength
- Supplied in 3m lengths, with custom options available
Coverage per wing is approximately 190mm, and custom angles or bespoke sizes can be requested through our custom flashings service. Supplied in 3m lengths, this ridge flashing is available in GreenCoat® Pural BT colours, including slate grey and silver fir green, to pair seamlessly with your tile form sheets.
Specification
- Material: Galvanised steel
- Finish: GreenCoat® Pural BT
- Length: 3m
- Nominal size: 195mm Ă— 195mm
- Coverage: Approximately 190mm per wing
- Internal angle: 130° (flexes 10 to 15° each way)
- Compatibility: 41/1000 tile form sheets
Fixing Guidance
Install the Nordic ridge flashing by stitching it to the tile form sheet below using 22mm stitching screws. Allow a minimum 200mm overlap between adjoining ridge pieces to maintain a weather‑tight seal. Remove the protective film after installation, or sooner if stored in sunlight or wet weather, to prevent bonding with the coating.
To reduce the risk of injury when working with flashings or roofing sheets, you can use our Cut Level 5 safety gloves for effective hand protection.
For best practice guidance on overlaps, recommended fixings and step-by-step installation advice, please visit our Help & Advice page, where you will find detailed information and useful guides before starting your project.
Looking for an alternative?
For a 200mm x 200mm ridge flashing in GreenCoat® Pural BT, see our 130º ridge flashings in GreenCoat® Pural BT finish.
For bespoke flashings, see our custom flashings.
Or browse our roofing department for flashings and more.
For large commercial projects, high volumes or specialist requirements, our team is happy to help, so please call 01837 659901 for expert advice. For more information, visit our Contact Us page.
From £7.74 inc VAT
From £28.49 inc VAT
Order A Sample Pack!
Click here to view the online installation guide (1).
Download the datasheet for Nordic Ridge Flashings in GreenCoat® Pural Finish in 3m 195 x 195mm
| Type | When? | Cost? | ||
|---|---|---|---|---|
 |
National Delivery | Orders under £1,000 | Est. 5 working days* Roofing items 7-10 working days* |
£192.00 |
| Orders over £1,000 | Est. 5 working days* Roofing items 7-10 working days* |
£96.00 | ||
| Orders over £1,500 | Est. 5 working days* Roofing items 7-10 working days* |
FREE | ||
| Scotland Delivery | Postcodes: PA, PH, DD, AB, IV, & KW | Est. 15 working days* Roofing items 7-10 working days* |
£360.00 | |
|
|
||||
|
Millboard Delivery | Orders under £2,000 | Est. 5 working days* | £192.00 |
| Orders over £2,000 | Est. 5 working days* | FREE | ||
|
|
||||
 |
Parcelforce Standard | (Small Parcels) | 3-5 working days* | £10.30 |
| (Large Parcels) | 3-5 working days* | £31.80 | ||
|
|
||||
 |
Sample Packs via Courier | 5 working days* | FREE | |
*Please allow for public holidays and weekends (non-delivery days)
Some of our products are available for collection from our warehouses in Okehampton (Devon) and Andover (Hampshire) - This option will show at checkout, when available.
Standard collection lead time is 3-5 working days, this may vary depending on the product. If you would like to collect your order after 2 hours, please choose this option at checkout.
Please note that collections are only available from Monday-Friday, 08:00 - 17:00 & Saturday, 08:00 - 12:30 (Note: this IS the cut off time for collections, despite our closing time of 13:00)
Please Note The Following Prior To Collection:
Vehicles we can and cannot load
Cladco Profiles® will only load flatbed lorries and flatbed trailers for insurance purposes. If the appropriate vehicle is not available, two people would be required for a collection.
Cladco Profiles® will NOT load any vehicles with roof racks, horse boxes, cattle lorries or fixed-sided trailers. Cladco Profiles® has the right to refuse loading a vehicle for any reason.
Before arranging a collection, please read our Customer Collection Notice below.
Our Okehampton HQ and Warehouses (Devon)
Our Andover Warehouses (Hampshire)
Customer Collection Notice
Please ensure you have pre-booked your collection slot before travelling to site.
When arriving to collect your order, please report to a member of our Warehouse Team who will register your arrival and locate your goods. Once ready, your items will be picked and brought to your vehicle loading area.
During busy periods, there may be a short wait while our yard team assist other customers or complete other loading tasks. We always do our best to work within your booked collection time.
We respectfully draw your attention to the following important points:
- Loading is ultimately the customer’s responsibility. While our team can assist with mechanical loading using forklifts, we cannot handball items into enclosed vehicles. Customers must ensure their vehicle is suitable and that goods are safely loaded and adequately secured before leaving the premises.
- Sharp sheeting, metal goods, and long/heavy items may pose additional handling risks. Please come prepared with high-quality protective gloves, and any appropriate protection materials to avoid damage to your vehicle or restraints (e.g. ropes or straps). The edges of roofing sheets and metal products can be extremely sharp, and care should be taken when handling.
- We strongly recommend that customers bring their own straps, ropes, or other securing materials, as we are unable to provide these at the point of collection.
- If you are unsure of your vehicle’s load capacity, we can advise the approximate weight of your order in advance. It is your responsibility to ensure your vehicle is suitable for transporting the goods safely and legally.
- Cladco will not be held liable for any damage to your vehicle or goods once they have been loaded and leave our premises. Loading assistance is provided entirely at the customer’s own risk.
Click & Collect – Pre-Booking Required
You are welcome to collect your order from either our Okehampton (Devon) or Andover (Hampshire) site. All collections must be pre-booked in advance so your items can be picked, packed and ready for you.
Please do not travel to site without a confirmed collection time, as we cannot guarantee your order will be available.
Once your items are ready, you will receive an email with a link to book your collection slot. Please note, same-day collections are not available and bookings must be made at least two hours in advance.
When you arrive, please bring your order confirmation and follow the signage to the collection area where a member of our team will assist you.
Some reviews shown may be from customers who purchased similar or related products.
No reviews
