Metal 3m Corner Barge Flashings for your Roofing Project
Cladco Corner Barge Flashings are cut to 3m lengths and folded to a 90-degree internal angle, flexing 10–15 degrees either way depending on your requirements. Our steel Barge Corner Flashings include a 10mm safety welt to increase the strength of the material.
Manufactured with a hard-wearing GreenCoat® Pural BT coating, these Barge Flashings can be secured to existing Tile Form Roofing Sheets using 22mm Stitching Screws. You will need to allow for a minimum overlap of 200mm when fitting Flashings end-on-end.
3m Corner Barge Flashings are a necessary part of any profiled clad building. With the range and colours that are available, Flashings can enhance the aesthetics of any structure, roofing or side cladding project.
It is advised that these Flashings are only installed alongside our 41/1000 Tile Form Roofing Sheets.
Please note: 150mm x 150mm Barge Flashings give an actual coverage of 140mm x 140mm due to a 10mm safety welt. Read our Flashings Installation Guide for more information.
We aim to accommodate your needs as much as possible. All you need to do is contact us and give us the dimensions you require. Available in a range of colours and finishes to suit your Roof Sheeting, for any queries simply call us on 01837 659901.
Please note: The Mica coating is no longer available. This finish has now been upgraded to the new GreenCoat® Pural BT coated steel in 0.7mm thickness.
