Cladco 3m Abutment Flashings, Prelaq Mica Coated
Abutment Flashings are made with a Prelaq Mica coat and are produced on-site at the Cladco warehouse from multi-layered galvanised steel. Each Flashing is pre-coated with a tough Prelaq Mica coating to match Cladco Prelaq Mica Sheets.
Abutment Flashings have a 110-degree angle and can flex between 10 to 15 degrees both ways during installation.
This coating has a weather-resistant Prelaq Mica finish that gives high scratch resistance and durability, with excellent longevity for any roofing project such as a lean-to building.
Secure to steel sheets below using 22mm Stitcher Screws and ensure a 200mm overlap between each Abutment Flashing.
Cladco Abutment Flashings are also available in PVC Plastisol, Polyester Paint and plain Galvanised coatings.
Please note: These 200mm x 200mm Flashings provide a coverage of 190mm x 190mm due to the 10mm safety welt.