Cladco 3m Abutment Flashings with a Polyester Paint Coat
Cladco Abutment Flashings with a Polyester Paint coat are produced from multi-layered, galvanised steel and coated with a smooth Polyester Paint finish.
Our metal Abutment Flashings feature a 110-degree angle (internal), and can flex 10-15 degrees during the installation process.
This coating has a smooth Polyester Paint coat that can last 20 years or more in normal environments. Polyester Paint provides a moderate resistance to scratching and damage.
Each Abutment Flashing features a safety welt of 10mm that makes them safe to handle and improves the final look of your building.
Secure to sheets with 22mm Stitcher Screws and allow an overlap of 200mm between one Flashing to the next Abutment Flashing.
Cladco Abutment Flashings are also available in PVC Plastisol, GreenCoat® Mica and plain Galvanised coatings.
These Flashings are only recommended for use with our 13/3 Corrugated, 32/1000 Box Profile and 34/1000 Box Profile Roofing Sheets.
Please note: These 200mm x 200mm Flashings provide a coverage of 190mm x 190mm due to the 10mm safety welt.
Polyester Paint Flashings come covered with a clear protective film. To avoid it sticking to the surface, take off the film after installation or if storing Flashings in direct sunlight or in wet weather conditions.