Pural BT Touch-Up Paint – 250ml
For GreenCoat® Pural BT Roofing & Cladding Sheets
Restore a consistent, professional finish to your pre-painted metal sheets with Cladco’s Pural BT Touch-Up Paint. This Pural BT touch-up paint offers a simple, effective way to conceal minor scratches, scuffs, and exposed edges, this high-quality paint is fully compatible with Cladco’s Pural BT standing seam, tile form, and flat sheets.
Perfect for small, localised repairs, it’s supplied in a 250ml tin with a wide opening, making application straightforward and mess-free with most standard brush sizes
Product Features:
Compatible with GreenCoat® Pural BT-coated steel
Available in 4 colours: Slate Grey, Night Black, Tile Red, Silver Fir Green
Supplied in 250ml tins – easy to apply with a brush
Non-hazardous and safe to store and handle
Made in the EU
To maintain paint quality, reseal the tin tightly after use and store in a cool, dry location away from direct sunlight and extreme temperatures.
Application Instructions
Touch-Up Paint for Pre-Painted Metal Sheets – Scratch & Surface Repair
Follow these best practices for effective and long-lasting repairs:
General Guidelines:
Apply only where needed – touch-up paint may age/fade differently to factory finishes
Apply two coats, with a total dry film thickness of 60 μm (i.e. 2 coats of 80 μm wet film)
Paint in conditions above +8°C and below 75% humidity
Ensure all surfaces are clean, dry, and free of grease or loose paint before application
For Scratches Up to 50mm Wide:
Remove any loose or flaking paint
Clean the area thoroughly
Use a soft brush or paint pen to apply paint directly to the scratch
Choose a brush that matches the width of the damage for minimal overlap
For Areas Over 50mm Wide:
Remove loose paint and clean the area
Prime using a rust inhibiting primer with a soft brush.
Once dry, apply Pural BT touch-up Paint as a topcoat with minimal overlap
Note: Always ensure a good colour match before application. Not suitable for large surface areas or full recoating.
