Chat with us, powered by LiveChat
arrow-up

Composite Wall Cladding Starter Strip

£14.34
(8)

Cladco 3m composite wall cladding starter strips are specifically designed to ensure a level and secure installation for your Cladco Signature composite cladding boards. Begin your project by fixing the starter strip at the base of the wall, allowing you to install the first board accurately and with confidence.

SKU: WPCWSTRIP

delivery NATIONAL DELIVERY - checking... from £0.00
ANDOVER COLLECTION
OKEHAMPTON COLLECTION
Total Price: £14.34 inc VAT
loader
Loading...
Details

About our composite wall cladding starter strip

Before using Cladco Signature composite cladding boards, you will need to make sure your project is level and that is where this wall cladding starter strip comes in use, ensuring boards are installed neatly onto a building’s exterior.

Designed using tough precision-made galvanised steel, each cladding starter strip has increased corrosion and wear resistance from the elements, to last over time.

Starter strip specifications

  • Length: 3m
  • Height: 50mm
  • Depth: 10mm
  • Weight (Approx.): 1.32kg

To begin the installation, fix the wall cladding starter strip to the bottom of each composite batten on your exterior wall, then slot the first cladding board into place.

Ensure there is a minimum 15mm gap between the ground and the starter strip to prevent the boards from touching the floor. The starter strip must also be completely level before installing any cladding boards.

For more composite cladding trims, such as our 3m aluminium perforated closure, why not browse more of our composite cladding products here.

If you need help with installation along the way, please follow our handy composite cladding installation guide.

Please note that Cladco starter strips are only compatible with Cladco composite cladding boards. Images are used for illustration purposes only, and the actual item may vary slightly from the image above.

Read more Read less
Customers Also Viewed Navigating through the elements of the carousel is possible using the tab key. You can skip the carousel or go straight to carousel navigation using the skip links.
4m Composite Joists/Batten

£11.88 inc VAT

3.6m Signature Woodgrain Composite Wall Cladding
Available in 8 colours

From £21.54 inc VAT

3.6m Signature Composite Wall Cladding
Available in 8 colours

From £17.30 inc VAT

Phillips Impact Screwdriver Bits PH2 x 65mm – Pack of 3

£4.98 inc VAT

2.2m Signature Composite Skirting Trim
Available in 8 colours

From £11.40 inc VAT

2.2m Signature Composite Corner Trim
Available in 8 colours

From £11.40 inc VAT

4.8m Green-Treated Timber Batten 50x25mm (Type A, Use Class 2)

£5.57 inc VAT

Samples plus minus

Order A Sample Pack!

The best way to choose your preferred colour is with our Sample Packs. Order Sample Packs
Installation Guide plus minus

pdf Download our printable installation guide.

Specifications plus minus
Weight
1.32kg
Technical Information plus minus

pdf Download the datasheet for Composite Wall Cladding Starter Strip

Delivery plus minus
Type When? Cost?
National Delivery Orders under £1,000 Est. 5 working days*
Roofing items 7-10 working days*
£192.00
Orders over £1,000 Est. 5 working days*
Roofing items 7-10 working days*
£96.00
Orders over £1,500 Est. 5 working days*
Roofing items 7-10 working days*
FREE
Scotland Delivery Postcodes: PA, PH, DD, AB, IV, & KW Est. 15 working days*
Roofing items 7-10 working days*
£360.00

Millboard Delivery Orders under £2,000 Est. 5 working days* £192.00
Orders over £2,000 Est. 5 working days* FREE

Parcelforce Standard (Small Parcels) 3-5 working days* £8.50
Parcelforce Standard (Large Parcels) 3-5 working days* £30.00

Sample Packs via Courier 5 working days* FREE

*Please allow for public holidays and weekends (non-delivery days) 

Collection plus minus

Some of our products are available for collection from our warehouses in Okehampton (Devon) and Andover (Hampshire) - This option will show at checkout, when available.

Standard collection lead time is 3-5 working days, this may vary depending on the product. If you would like to collect your order after 2 hours, please choose this option at checkout.

Please note that collections are only available from Monday-Friday, 08:00 - 17:00 & Saturday, 08:00 - 12:30 (Note: this IS the cut off time for collections, despite our closing time of 13:00)

Please Note The Following Prior To Collection:

No Cutting On Site

PPE/Hi-Vis Must be Worn At All Times

AlL Visitors Must Report to Reception


Vehicles we can and cannot load

Cladco Profiles will only load flatbed lorries and flatbed trailers for insurance purposes. If the appropriate vehicle is not available, two people would be required for a collection.

Cladco Profiles will NOT load any vehicles with roof racks, horse boxes, cattle lorries or fixed-sided trailers. Cladco Profiles has the right to refuse loading a vehicle for any reason.

Before arranging a collection, please read our Customer Collection Notice below.

Okehampton

Our Okehampton HQ and Warehouses (Devon)

Hampshire

Our Andover Warehouses (Hampshire)

Read more

Customer Collection Notice

Please ensure you have pre-booked your collection slot before travelling to site.

When arriving to collect your order, please report to a member of our Warehouse Team who will register your arrival and locate your goods. Once ready, your items will be picked and brought to your vehicle loading area.

During busy periods, there may be a short wait while our yard team assist other customers or complete other loading tasks. We always do our best to work within your booked collection time.

We respectfully draw your attention to the following important points:

  • Loading is ultimately the customer’s responsibility. While our team can assist with mechanical loading using forklifts, we cannot handball items into enclosed vehicles. Customers must ensure their vehicle is suitable and that goods are safely loaded and adequately secured before leaving the premises.
  • Sharp sheeting, metal goods, and long/heavy items may pose additional handling risks. Please come prepared with high-quality protective gloves, and any appropriate protection materials to avoid damage to your vehicle or restraints (e.g. ropes or straps). The edges of roofing sheets and metal products can be extremely sharp, and care should be taken when handling.
  • We strongly recommend that customers bring their own straps, ropes, or other securing materials, as we are unable to provide these at the point of collection.
  • If you are unsure of your vehicle’s load capacity, we can advise the approximate weight of your order in advance. It is your responsibility to ensure your vehicle is suitable for transporting the goods safely and legally.
  • Cladco will not be held liable for any damage to your vehicle or goods once they have been loaded and leave our premises. Loading assistance is provided entirely at the customer’s own risk.

Click & Collect – Pre-Booking Required

You are welcome to collect your order from either our Okehampton (Devon) or Andover (Hampshire) site. All collections must be pre-booked in advance so your items can be picked, packed and ready for you.

Please do not travel to site without a confirmed collection time, as we cannot guarantee your order will be available.

Once your items are ready, you will receive an email with a link to book your collection slot. Please note, same-day collections are not available and bookings must be made at least two hours in advance.

When you arrive, please bring your order confirmation and follow the signage to the collection area where a member of our team will assist you.

Read less
Frequently Asked Questions
They are made from galvanised steel, which provides increased corrosion and wear resistance.
No, Cladco Starter Strips are only compatible with Cladco Composite Cladding Boards.
Once the Composite Battens have been installed, attach the Starter Strip to the bottom of each Batten. Then they can be slotted into place. Ensure there is a minimum of a 15mm gap between the floor and the Starter Strip, and that the Starter Strip is perfectly level before installing any Boards.

Did you find what you were looking for?

Reviews
Customer Reviews
4.9 Based on 8 reviews
Provided a good base

Price

Quality

Value

Reassured that my cladding is supported by a stable and resistant steel.
Installation guide was helpful

Price

Quality

Value

The fact that they're galvanised suited my project nicely also.
Made everything level

Price

Quality

Value

They worked well at making sure the cladding was completely level.
Excellent product. This review is for the starter strip, cladding composite corners and wall cladding.

Price

Quality

Value

I would definitely recommend Cladco Cladding. Easy to install. The only criticism would be is I think the delivery charge is a bit steep. Otherwise, very happy with the finish.
The best

Price

Quality

Value

Very good product
great

Price

Quality

Value

excellent product
very good product easy to use.

Price

Quality

Value

sets off the shed giving it a finished look. A pity that there are no right angle corners.
GREAT SERVICE

Price

Quality

Value

GREAT HAD AN ISSUE WITH DAMAGE ALL SORTED QUICKLY
Prev
Next
You're reviewing: Composite Wall Cladding Starter Strip
Your Rating *
Images

check-circle You submitted your review for moderation.

loader
Loading...
loader
Loading...