Chat with us, powered by LiveChat
arrow-up

Stainless Steel Hidden Clips for Aluminium Decking + M4x30 SS Self Tapping Screws (100 Pack)

£27.00
(3)

For a sturdy, durable and neat fitting of Cladco aluminium decking, these stainless steel hidden clips and decking screws provide a professional installation and are an easy-to-fit and long-lasting solution. Perfect for creating a seamless decking board finish, these fixings will help to create a ‘hidden’ fixing system that has little-to-no visibility when looking at the boards.

SKU: FIXALUDEK30SS

delivery NATIONAL DELIVERY - checking... from £0.00
ANDOVER COLLECTION
OKEHAMPTON COLLECTION
Total Price: £27.00 inc VAT
loader
Loading...
Details

Why Choose These Stainless Steel Hidden Decking Clips And Self Tapping Screws?

These stainless steel clips provide a hidden connection between aluminium decking boards by tightly securing into the side grooves of each board, and joining them to the next.

Not only do the clips connect the boards together, they provide a minimal 2mm to 3mm gap and reduce the need for larger T-clip fixings that leave a larger, more obvious gap.

We advise connecting seven clips for every 3.6m aluminium decking board, with clips being supplied in packs of 100.

When you need to firmly secure your decking clips in place, our M4x30 stainless steel self-tapping screws will provide a secure and accurate fit. Each pack contains 100 screws and 100 decking clips. The screws can be installed easily alongside the clips using a PH2 screwdriver bit.

These screws should not rust or corrode once installed. Made from strong and high-quality stainless steel, the fixings will ensure that the aluminium decking boards will not crack or splinter around the screw entry point.

Another advantage of using these screws is that they have a TEK type tip which allows for them to be screwed directly into the board, with no need for pre-drilling a pilot hole.

We recommend one pack per installation project as a guideline, with our handy aluminium decking installation guide available to provide advice when you need it.

Please note: These stainless steel slips and screws are for use on Cladco aluminium decking products only and are not to be used in conjunction with composite or timber decking products.

Looking for starter clips?

See our stainless steel starter clips for aluminium decking

Looking for aluminium structural joists?

See our 4m aluminium decking joist

Or browse our aluminium decking department for decking boards and more…

Read more Read less
Samples plus minus

Order A Sample Pack!

The best way to choose your preferred colour is with our Sample Packs. Order Sample Packs
Installation Guide plus minus

pdf Download our printable installation guide.

Specifications plus minus
Weight
1.00kg
Technical Information plus minus

pdf Download the datasheet for Stainless Steel Hidden Clips for Aluminium Decking + M4x30 SS Self Tapping Screws (100 Pack)

Technical Image 1 Technical Image 2
Delivery plus minus
Type When? Cost?
National Delivery Orders under £1,000 Est. 5 working days*
Roofing items 7-10 working days*
£192.00
Orders over £1,000 Est. 5 working days*
Roofing items 7-10 working days*
£96.00
Orders over £1,500 Est. 5 working days*
Roofing items 7-10 working days*
FREE
Scotland Delivery Postcodes: PA, PH, DD, AB, IV, & KW Est. 15 working days*
Roofing items 7-10 working days*
£360.00

Millboard Delivery Orders under £2,000 Est. 5 working days* £192.00
Orders over £2,000 Est. 5 working days* FREE

Parcelforce Standard (Small Parcels) 3-5 working days* £8.50
Parcelforce Standard (Large Parcels) 3-5 working days* £30.00

Sample Packs via Courier 5 working days* FREE

*Please allow for public holidays and weekends (non-delivery days) 

Collection plus minus

Some of our products are available for collection from our warehouses in Okehampton (Devon) and Andover (Hampshire) - This option will show at checkout, when available.

Standard collection lead time is 3-5 working days, this may vary depending on the product. If you would like to collect your order after 2 hours, please choose this option at checkout.

Please note that collections are only available from Monday-Friday, 08:00 - 17:00 & Saturday, 08:00 - 12:30 (Note: this IS the cut off time for collections, despite our closing time of 13:00)

Please Note The Following Prior To Collection:

No Cutting On Site

PPE/Hi-Vis Must be Worn At All Times

AlL Visitors Must Report to Reception


Vehicles we can and cannot load

Cladco Profiles will only load flatbed lorries and flatbed trailers for insurance purposes. If the appropriate vehicle is not available, two people would be required for a collection.

Cladco Profiles will NOT load any vehicles with roof racks, horse boxes, cattle lorries or fixed-sided trailers. Cladco Profiles has the right to refuse loading a vehicle for any reason.

Before arranging a collection, please read our Customer Collection Notice below.

Okehampton

Our Okehampton HQ and Warehouses (Devon)

Hampshire

Our Andover Warehouses (Hampshire)

Read more

Customer Collection Notice

Please ensure you have pre-booked your collection slot before travelling to site.

When arriving to collect your order, please report to a member of our Warehouse Team who will register your arrival and locate your goods. Once ready, your items will be picked and brought to your vehicle loading area.

During busy periods, there may be a short wait while our yard team assist other customers or complete other loading tasks. We always do our best to work within your booked collection time.

We respectfully draw your attention to the following important points:

  • Loading is ultimately the customer’s responsibility. While our team can assist with mechanical loading using forklifts, we cannot handball items into enclosed vehicles. Customers must ensure their vehicle is suitable and that goods are safely loaded and adequately secured before leaving the premises.
  • Sharp sheeting, metal goods, and long/heavy items may pose additional handling risks. Please come prepared with high-quality protective gloves, and any appropriate protection materials to avoid damage to your vehicle or restraints (e.g. ropes or straps). The edges of roofing sheets and metal products can be extremely sharp, and care should be taken when handling.
  • We strongly recommend that customers bring their own straps, ropes, or other securing materials, as we are unable to provide these at the point of collection.
  • If you are unsure of your vehicle’s load capacity, we can advise the approximate weight of your order in advance. It is your responsibility to ensure your vehicle is suitable for transporting the goods safely and legally.
  • Cladco will not be held liable for any damage to your vehicle or goods once they have been loaded and leave our premises. Loading assistance is provided entirely at the customer’s own risk.

Click & Collect – Pre-Booking Required

You are welcome to collect your order from either our Okehampton (Devon) or Andover (Hampshire) site. All collections must be pre-booked in advance so your items can be picked, packed and ready for you.

Please do not travel to site without a confirmed collection time, as we cannot guarantee your order will be available.

Once your items are ready, you will receive an email with a link to book your collection slot. Please note, same-day collections are not available and bookings must be made at least two hours in advance.

When you arrive, please bring your order confirmation and follow the signage to the collection area where a member of our team will assist you.

Read less
Frequently Asked Questions
We recommend connecting seven clips for every 3.6m of Cladco aluminium decking board.
Yes. The screws feature: A TEK-type tip, allowing for direct installation with no pilot hole required Compatibility with a PH2 screwdriver bit A design that ensures a secure, rust- and corrosion-resistant hold
No. These high-quality stainless steel screws are designed to prevent cracking or splintering around the entry point.

Did you find what you were looking for?

Reviews
Customer Reviews
5 Based on 3 reviews
Quality fixings

Price

Quality

Value

I followed the guide and used 7 clips for every 3.6m of board. Feels very secure.
Left no visible connections

Price

Quality

Value

Easy to use and left no marks showing where they were perfectly hidden.
Great system for securing aluminium

Price

Quality

Value

Secured my decking without having to pre-drill.
Prev
Next
You're reviewing: Stainless Steel Hidden Clips for Aluminium Decking + M4x30 SS Self Tapping Screws (100 Pack)
Your Rating *
Images

check-circle You submitted your review for moderation.

loader
Loading...
loader
Loading...