Chat with us, powered by LiveChat
arrow-up

Brett Martin 68mm Round PVC 112.5° Downpipe Offset Bend in Black

£3.90
(3)

Used to alter downpipe direction around architectural features, this 112.5° bend offers a gentler angle than the 92.5° bend. Made from PVC, it forms part of Brett Martin’s 68mm rainwater system and connects with a push-fit seal. Fully compatible with Brett Martin’s 112mm Roundstyle guttering.

SKU: BR209B

delivery NATIONAL DELIVERY - checking... from £0.00
ANDOVER COLLECTION
OKEHAMPTON COLLECTION
Total Price: £3.90 inc VAT
loader
Loading...
Details

Engineered to create a 112.5° change of direction in your rainwater drainage system, this PVC offset bend redirects Brett Martin’s 68mm round downpipes, before continuing the vertical run towards the drain. When a larger step-out is required, you can connect two offset bends together with one turned upward and one downward, to create a swan neck. This stepped arrangement is ideal for clearing wide projections or bringing the pipe back tight to the wall without resorting to sharp angles.

The fitting connects to Brett Martin's 68mm plain-ended round downpipe via a secure push-fit socket and is fully compatible with the Brett Martin 112mm Roundstyle guttering system. Moulded from gloss-black, UV-stabilised PVC, it is lightweight, corrosion-resistant and covered by Brett Martin’s 10-year guarantee.

Offset bend specifications

  • Angle: 112.5°
  • Pipe compatibility: 68mm round
  • Material: PVC
  • Colour: Black (Gloss)
  • Guarantee: 10 years

Installation tips

Insert the plain end of the pipe into the socket of the bend until it seats fully. To allow for thermal expansion, retract the 68mm downpipe by at least 5mm before securing it to the wall. Spray the inside of the socket with a silicone-based lubricant to ease assembly and ensure a watertight fit.

Handling

This Brett Martin rainwater system is made from PVC, making it lightweight and easy to handle. All guttering and fittings should be handled with care at all times to avoid not only damage to the product but also preserve the appearance.

Storage

All Brett Martin products should be stored in conditions that will prevent the risk of damage and impact the appearance. Fittings and long items, such as gutter sections and pipes, should be kept in a cool, dry place. Gutter and pipe lengths should also be laid horizontally while in storage on a smooth, level surface to prevent distortion.

If storing gutters, pipes and fittings outdoors, ensure all items remain in their original packaging until installation to protect them and maintain their original appearance.

Maintenance

Regular maintenance of your rainwater gutter systems is essential, with cleaning recommended at least once a year. In areas prone to significant windborne debris, such as falling leaves, more frequent inspections and clearing may be necessary.

The high-gloss finish of the guttering helps resist dirt build-up, but when external cleaning is required, a mild detergent solution is suitable for removing surface grime without damaging the finish.

Read more Read less
Samples plus minus

Order A Sample Pack!

The best way to choose your preferred colour is with our Sample Packs. Order Sample Packs
Specifications plus minus
Colour
Black
Weight
0.12kg
Delivery plus minus
Type When? Cost?
National Delivery Orders under £1,000 Est. 5 working days*
Roofing items 7-10 working days*
£192.00
Orders over £1,000 Est. 5 working days*
Roofing items 7-10 working days*
£96.00
Orders over £1,500 Est. 5 working days*
Roofing items 7-10 working days*
FREE
Scotland Delivery Postcodes: PA, PH, DD, AB, IV, & KW Est. 15 working days*
Roofing items 7-10 working days*
£360.00

Millboard Delivery Orders under £2,000 Est. 5 working days* £192.00
Orders over £2,000 Est. 5 working days* FREE

Parcelforce Standard (Small Parcels) 3-5 working days* £8.50
Parcelforce Standard (Large Parcels) 3-5 working days* £30.00

Sample Packs via Courier 5 working days* FREE

*Please allow for public holidays and weekends (non-delivery days) 

Collection plus minus

Some of our products are available for collection from our warehouses in Okehampton (Devon) and Andover (Hampshire) - This option will show at checkout, when available.

Standard collection lead time is 3-5 working days, this may vary depending on the product. If you would like to collect your order after 2 hours, please choose this option at checkout.

Please note that collections are only available from Monday-Friday, 08:00 - 17:00 & Saturday, 08:00 - 12:30 (Note: this IS the cut off time for collections, despite our closing time of 13:00)

Please Note The Following Prior To Collection:

No Cutting On Site

PPE/Hi-Vis Must be Worn At All Times

AlL Visitors Must Report to Reception


Vehicles we can and cannot load

Cladco Profiles will only load flatbed lorries and flatbed trailers for insurance purposes. If the appropriate vehicle is not available, two people would be required for a collection.

Cladco Profiles will NOT load any vehicles with roof racks, horse boxes, cattle lorries or fixed-sided trailers. Cladco Profiles has the right to refuse loading a vehicle for any reason.

Before arranging a collection, please read our Customer Collection Notice below.

Okehampton

Our Okehampton HQ and Warehouses (Devon)

Hampshire

Our Andover Warehouses (Hampshire)

Read more

Customer Collection Notice

Please ensure you have pre-booked your collection slot before travelling to site.

When arriving to collect your order, please report to a member of our Warehouse Team who will register your arrival and locate your goods. Once ready, your items will be picked and brought to your vehicle loading area.

During busy periods, there may be a short wait while our yard team assist other customers or complete other loading tasks. We always do our best to work within your booked collection time.

We respectfully draw your attention to the following important points:

  • Loading is ultimately the customer’s responsibility. While our team can assist with mechanical loading using forklifts, we cannot handball items into enclosed vehicles. Customers must ensure their vehicle is suitable and that goods are safely loaded and adequately secured before leaving the premises.
  • Sharp sheeting, metal goods, and long/heavy items may pose additional handling risks. Please come prepared with high-quality protective gloves, and any appropriate protection materials to avoid damage to your vehicle or restraints (e.g. ropes or straps). The edges of roofing sheets and metal products can be extremely sharp, and care should be taken when handling.
  • We strongly recommend that customers bring their own straps, ropes, or other securing materials, as we are unable to provide these at the point of collection.
  • If you are unsure of your vehicle’s load capacity, we can advise the approximate weight of your order in advance. It is your responsibility to ensure your vehicle is suitable for transporting the goods safely and legally.
  • Cladco will not be held liable for any damage to your vehicle or goods once they have been loaded and leave our premises. Loading assistance is provided entirely at the customer’s own risk.

Click & Collect – Pre-Booking Required

You are welcome to collect your order from either our Okehampton (Devon) or Andover (Hampshire) site. All collections must be pre-booked in advance so your items can be picked, packed and ready for you.

Please do not travel to site without a confirmed collection time, as we cannot guarantee your order will be available.

Once your items are ready, you will receive an email with a link to book your collection slot. Please note, same-day collections are not available and bookings must be made at least two hours in advance.

When you arrive, please bring your order confirmation and follow the signage to the collection area where a member of our team will assist you.

Read less
Frequently Asked Questions
It redirects the flow of rainwater in a 68mm round downpipe, creating a gentle angle that helps clear projections or adjust the downpipe position before continuing the vertical run toward the drain.
Yes. You can connect two 112.5° bends, with one turned upward and one downward, to form a stepped swan neck. This is ideal for navigating deep soffits or moving pipework closer to the wall without sharp angles.
Absolutely. It’s fully compatible with Brett Martin’s 68mm round downpipe system and integrates seamlessly with the 112mm Roundstyle gutter system for domestic drainage.
It uses a push-fit socket. The plain end of the pipe is inserted into the bend until it seats fully. A silicone-based lubricant can help ease insertion and improve watertightness.
Yes. After inserting the pipe into the socket, retract it by at least 5mm before securing it to the wall. This allows for natural expansion during temperature changes.

Did you find what you were looking for?

Reviews
Customer Reviews
4.9 Based on 3 reviews
All good

Price

Quality

Value

Ordered with the rest of the Roundstyle kit. Fitted quickly, looks decent.
Great

Price

Quality

Value

Was worried it might pop apart but it’s solid and held its angle perfectly after clipping in.
fast delivery

Price

Quality

Value

came with the rest of the guttering from Cladco. no issues
Prev
Next
You're reviewing: Brett Martin 68mm Round PVC 112.5° Downpipe Offset Bend in Black
Your Rating *
Images

check-circle You submitted your review for moderation.

loader
Loading...
loader
Loading...