The coated steel strip we supply and profile into sheeting and flashings is produced by leading suppliers, giving us control over quality and traceability of the material we use.
To produce high quality pre-coated sheeting a system of multi layer coatings is applied to zinc coated high tensile steel strip and oven cured to ensure optimum adhesion. This gives a sheet with excellent corrosion resistance and climatic protection together with abrasion resistance and high strength. We provide an extensive range of colours, where choice and aesthetic appeal can be matched to environmental and performance requirements.
Please note our dripstop coating is available on Box Profile, Corrugated and Tileform profiles, please contact us for further information.
Jump to Colour Chart
PVC Plastisol Chart
PVC Plastisol Colours are available in Anthracite, Black, Chestnut, Goosewing Grey, Merlin Grey, Juniper Green, Moorland Green, Oliver Green, Slate Blue, Vandyke Brown and White.
Please note: Colours are for guidance purposes only, actual colour may vary from image supplied. - Numbers represent nearest BS/RAL reference. If you would like to see the physical colour before purchasing, please contact us for a free swatch sample.
PVC PROFILE
We manufacture PVC Plastisol coated sheeting in 34/1000 profiled sheeting with a 34mm deep profile which gives 1000mm cover width which can be used at a minimum roof pitch of 4°. 32/1000 profiled sheeting with a 32mm deep profile which gives 1000mm cover width which can be used at a minimum roof pitch of 4°. 3” corrugated profile of 13 corrugations of 3 inches giving 990mm width cover which can be used at a minimum roof pitch of 10°.
QUALITY
The steel substrate has a hot dipped galvanised coating of 275 grammes per square metre. The substrate is primed and 200 microns of leather grain embossed Plastisol are applied to the external surface.
The reverse/ internal surface is galvanised and coated with a standard alkali grey wash coat. This gives a very long life (typically 15 to 25 years to first maintenance with a life in excess of 40 years in normal environments) with a high resistance to scratching and damage.
UV RESISTANCE
The Plastisol applied consists of Polyvinyl Chloride based Thermoplastic Resins with short molecular chains for better UV resistance particularly suited to the construction sector.
HEAT RESISTANCE
Maximum continuous temperature -40o C to +80o C.
TOLERANCES
All dimensions are subject to roll forming tolerances.
THICKNESS
PVC Plastisol coated sheeting is available in 0.5mm and 0.7mm thickness.
COLOUR
We supply PVC Plastisol in standard colours from stock: Goosewing Grey, Merlin Grey, Anthracite, Moorland Green, Olive Green, Juniper Green, Chestnut, Vandyke Brown, Slate Blue, Black and White.
STORAGE & HANDLING
For advice on storage and handling please consult the installation section of our website.
Polyester Paint Coated Colours are available in Slate Blue, Juniper Green, White, Black, Composite Grey and Light Grey.
Please note: Colours are for guidance purposes only, actual colour may vary from image supplied. - Numbers represent nearest BS/RAL reference. If you would like to see the physical colour before purchasing, please contact us for a free swatch sample.
POLYESTER PAINT COATED PROFILE
We manufacture Polyester Paint coated coated sheeting in 34/1000 profiled sheeting with a 34mm deep profile which gives 1000mm cover width which can be used at a minimum roof pitch of 4°. 32/1000 profiled sheeting with a 32mm deep profile which gives 1000mm cover width which can be used at a minimum roof pitch of 4°. 3” corrugated profile of 13 corrugations of 3 inches giving 990mm width cover which can be used at a minimum roof pitch of 10°.
QUALITY
The steel substrate has a hot dipped galvanised coating of 275 grammes per square metre.
The substrate is primed and coated with 25 microns of high grade Polyester enamel paint. The reverse/internal surface is galvanised and coated with a standard alkali grey wash coat. This gives long life (typically 8 to 12 years to first maintenance with a life in excess of 20 years in normal environments) but only has a moderate resistance to scratching.
HEAT RESISTANCE
Maximum continuous temperature -40o C to +80o C.
TOLERANCES
All dimensions are subject to roll forming tolerances.
THICKNESS
Polyester paint coated sheeting is available in 0.5mm and 0.70mm thickness.
COLOUR
Polyester paint finish sheeting is available in standard colours, Juniper Green, Slate Blue, White, Black, Composite Grey or Light Grey.
STORAGE & HANDLING
For advice on storage and handling please consult the installation section of our website.
TYPICAL APPLICATIONS:
Cladding, roofing and other building components, curtain walling, infil panels, partitioning, portable accommodation, cold stores, garage doors and vehicle panels.
GreenCoat® Pural BT
GreenCoat® Pural BT Coating is available in Nordic Night Black, Slate Grey, Tile Red, and Silver Fir Green.
Please note: Colours are for guidance purposes only; actual colours may vary from the images shown. Numbers represent the nearest BS/RAL reference. If you would like to view the physical colour before purchasing, please contact us for a free swatch sample.
GreenCoat® PURAL BT PROFILE
GreenCoat® Pural BT coated finishes are available in both Tile Form and Standing Seam profiles on our website. If you require this finish on a different profile, please contact us on 01837 659901 and we will be happy to assist.
QUALITY
GreenCoat® Pural BT is manufactured using patented BT (Bio-based Technology), offering a strong environmental advantage. In the BT coating, a significant portion of traditional fossil oil is replaced with Swedish rapeseed oil – a unique feature in the market.
SSAB holds the worldwide patent for this innovative coating technology.
The coating thickness is optimised for excellent wear resistance, weather durability, and low resource consumption. GreenCoat® Pural BT provides outstanding colour retention and superior corrosion protection.
The traditional appearance of this pantile-effect roofing sheet makes it ideal for sheds, garages, extensions, and more. Available colours include Nordic Night Black, Slate Grey, Tile Red, and Silver Fir Green.
HEAT RESISTANCE
GreenCoat® Pural BT products offer a premium finish designed to resist rust, white rust, UV radiation, scratches, and dirt build-up—resulting in reduced maintenance requirements.
THICKNESS
GreenCoat® Pural BT coating is available in 0.7mm thickness.
STORAGE & HANDLING
For guidance on proper storage and handling, please refer to the installation section on our website.
Galvanised
Please note: Colours are for guidance purposes only; actual colour may vary from image supplied. - Numbers represent nearest BS/RAL reference. If you would like to see the physical colour before purchasing, please contact us for a free swatch sample.
GALVANISED PROFILE
We manufacture galvanised coated sheeting in either 34/1000 Box profiled sheeting with a 34mm deep profile and a 166mm pitch in a 1000mm cover width which can be used at a minimum roof pitch of 4°. 32/1000 profiled sheeting with a 32mm deep profile which gives 1000mm cover width which can be used at a minimum roof pitch of 4°. or 3” corrugated profile of 13 corrugations of 3 inches giving 990mm width cover which can be used at a minimum roof pitch of 10°.
TOLERANCES
All dimensions are subject to roll forming tolerances.
THICKNESS
Galvanised sheeting is available in 0.5mm and 0.7mm thickness.
COLOUR
Galvanised
STORAGE & HANDLING
For advice on storage and handling please consult the installation section of our website.
TYPICAL APPLICATIONS
Cladding, roofing and other building components, curtain walling, infil panels, partitioning, portable accommodation, cold stores, garage doors and vehicle panels.