Cladco Fibre Cement Backer Board is a versatile, exterior grade construction material offering many benefits over ply or plasterboard, including increased load-bearing, A1 fire rating, mould and water-resistant properties. 1.2m lengths are available and in 6mm, 9mm, 12mm and 18mm thicknesses.

Galvanised Abutment Flashings are produced to 200mm x 200mm widths and in 3m lengths. Flashings are folded with a 110-degree internal angle and can flex 10-15 degrees to suit your lean-to project, or similar building. Manufactured from Galvanised steel for a rust-resistant, metal finish.

3m Abutment Flashings are manufactured to finish the adjoining edge of lean-to buildings, or other buildings, with an internal angle. Flashings are folded to create a 110-degree internal angle, with 10-15 degrees flex. Available in a smooth Polyester Paint coat, and in five colours, to match Cladco Roofing Sheets.

Prelaq Mica Abutment Flashings are made in 3m lengths from high-quality, coated steel. Complete the internal edge of a lean-to building, for example, with matching profiled Roofing Sheets. These Flashings are designed to flex 10-15 degrees either way from 110-degrees, and available in a choice of three colours: Black, Graphite Grey and Copper Brown.

Cladco Abutment Flashings with a PVC Plastisol coat provide a durable, scratch-resistant finish for projects with an internal angle such as lean-to buildings. Made from multi-layered steel and with a PVC leather grain finish to complement Cladco Roofing Sheets, these Flashings are available in a wide choice of 11 colours. 

Cladco Profiles 0.7mm Galvanised Corrugated Roofing Sheets provide the same aesthetic as traditional, corrugated iron profiles. 13/3 Corrugated profile features 13 round corrugations, with a width coverage of 990mm when lapped. Corrugated Roofing Sheets are a cost-effective alternative to traditional roofing and cladding materials. We advise using 65mm Screws with Baz Washers to fix these Sheets to Purlins.

Cladco 13/3 Corrugated Pofile Sheets have been a popular choice in construction for over a century. Ideal for side cladding, 0.5mm Galvanised Sheets feature 13 corrugations of 3 inch (76mm) round, with a width coverage of 3ft 3inch (or 990mm) when lapped. We advise using the 65mm Screws with BAZ Washer to install these Sheets.

Our 13/3 Corrugated 0.5 Thick Polyester Paint Coated Roof Sheets give the look of a traditional 13/3 ‘corrugated iron cladding’ profile. They have 13 corrugations of 3 inch/76mm round, with a width coverage of 990mm when installed. This sheet gives the look of traditional ‘corrugated iron cladding’ that has been used for over a century for a traditional look. Our Corrugated Roofing Sheets are available in a range of colours and 0.5 and 0.7mm thickness, with a polyester paint coat on top of the galvanised steel. Please note, we advise using the 65mm Screw with Baz Washer with these sheets.

Giving the look of a traditional ‘corrugated sheet iron’, our 13/3 Corrugated 0.5 Thick PVC Plastisol Coated Roof Sheet has 13 corrugations of 3 inch/76mm round and each corrugated sheet will cover a width of 990mm when installed. Corrugated roof sheets really do give the look of traditional ‘corrugated sheet iron’ that has been used for over a century. Corrugated steel roof sheets are available in a range of colours and 0.5 and 0.7mm thickness, with a PVC Plastisol coat on top of the galvanised steel corrugated roofing. Please note, we advise using the 65mm Screw with Baz Washer with these sheets.

These steel corrugated roof sheets give the look of a traditional 13/3 ‘corrugated iron’ profile and have 13 corrugations of 3 inch/76mm round, with a width coverage of 990mm when installed. They really do give the look of traditional ‘corrugated iron’ that has been used for over a century. Our corrugated roof sheets are available in a range of colours and 0.5 and 0.7mm thickness, with a polyester paint coat on top of the galvanised steel.

We advise the use of TEK screws with BAZ washer on our corrugated sheets as the BAZ washer creates a seal.

Cladco 13/3 Corrugated Roofing Sheets with a PVC Plastisol Coat feature 13 corrugations, each 3 inch/76mm. Corrugated Roof Sheets give a total width coverage of 990mm when installed. Galvanised Corrugated Roof Sheets are available in a range of colours and in 0.7mm thickness. Please note, we advise using the 65mm Screws with Baz Washers with these sheets.

These Screws are for fixing our Big 6 GRP Translucent Roofing Sheets, or Big 6 Fibre Cement Sheets, to timber. TEK type self-drilling fixing screws, with a 5/16th hexagonal head and BAZ sealing washer.

Please note: image may vary from actual item supplied due to lighting variations and camera angles.

Cladco 3m Galvanised Ridge Flashings are used to seal and finish an apex roof. Folded to a 130-degree internal angle, Ridge Flashings can be flexed 10-15 degrees either way depending on your roof’s angle. Cladco Flashings include a 10mm safety welt both sides.

Ridge pieces are used at the apex of the roof to join the two sides together. Cladco polyester paint coated flashing ridges are folded to a 130-degree internal angle and will flex 10–15 degrees either way, dependent on the angle of your roof. Metal roof flashing ridges are a major component in any profiled clad apex roof and are available in a range of colours and finishes to match our roofing sheets. Polyester paint coated ridge flashing will enhance the aesthetics of any building, providing the perfect finish.

Ridge pieces are used at the apex of the roof to join the two sides together. Cladco Ridges are folded to a 130-degree internal angle and will flex 10 – 15 degrees either way, dependent on the angle of your roof. Ridges area major component in any profiled clad apex roof and as they are available in a range of colours and finishes to match our roof sheets, they will enhance the aesthetics of any building.

Cladco Roof Ridge cap pieces are used at the apex of the roof to join the two sides together. They are folded to a 130-degree internal angle and will flex 10 – 15 degrees either way, dependent on the angle of your roof. Ridges are a major component in any profiled clad apex roof and as they are available in a range of colours and finishes to match our roof sheets, PVC ridge caps will enhance the aesthetics of any building.

Cladco Purlin Cleats are designed to be bolted to 175mm Z Purlins to enable you to secure your roof purlins to rafters. Manufactured from high-grade steel with a natural finish, Cleats come pre-drilled with 18.25mm holes for use with M16 bolts.

Face size: 129mm x 145mm

Our types of metal purlins are manufactured from 1.8mm thick Z39 structural grade galvanised steel. Used to join 2 of our 175mm Z purlins together, the types of metal purlins used for sleeves are 550mm long and designed to fit perfectly on the end of the Z purlins.

The Z purlin sleeves used alongside our Z purlins system will give you a lighter, stronger and cheaper way to support your roof sheets with ease of handling for on-site installations.

Cladco Z Purlins are manufactured from 1.8mm thick, structural grade steel, designed to support Roofing Sheets. Metal Purlins are 175mm wide and available in lengths from 1.5m to 9m. High-quality Purlin Cleats and Sleeves are available for securing Z Purlins within your roof’s structure.

Cladco Fibre Cement Exterior Grade Construction Boards are multi-purpose Backer Boards used in construction, offering many benefits over ply or plasterboard. This material is ideal for levelling uneven surfaces, using in damp-prone areas, as well as use around fireplaces due to being A1 fire rated. 2.4m lengths available and in 6mm, 9mm, 12mm and 18mm thicknesses.

Self-drilling “stitching” self-tapping screws are available for fixing sheet to sheet on laps they are also used to secure the flashings to sheets such as ridges and barge.

Cladco 32/1000 Box Profile 0.5mm thick Roofing Sheets are a popular choice among our selection of Roofing Sheets. Sometimes referred to as single-skin Box Profile Sheets, they are often used for side cladding on buildings. Incorporating 6 profiles of 200mm pitch across the Sheet width, with a 32mm profile height, these are superb Roofing Sheets for both home or commercial use.

32/1000 Box Profile Polyester Paint Coated Roof Sheets are robust single-skin sheeting comprising 6 profiles 200mm apart across the width of the Sheet. With a 32mm profile height, our 32/1000 Box Profile Roofing Sheets are preferred by some for their low profile appearance. The high-quality, coated steel strip gives 1000mm actual width coverage when lapped and is available in a range of colours.

Our 0.5mm thick single skin box profile PVC roof sheets give robust strength roofing sheets. Incorporating 6 profiles of 200mm pitch across the width of the sheet and 32mm profile height the roofing sheets work in both a domestic and a commercial environment.

32/1000 Box Profile Roofing Sheets with a 0.7mm thickness provide a robust, strong roof covering. Incorporating 6 profiles 200mm apart, with a 32mm profiled height, PVC Plastisol Roofing Sheets feature a tough leather-grain finish and are available in a range of colours to suit your project.

Our 32/1000 box profile, 0.7 thick galvanised roof sheets, sometimes referred to as single skin box profile sheets, are one of our most robust roofing sheets.

Incorporating 6 profiles of 200mm pitch across the sheet width and 32mm profile height, these are superb sheets for home or commercial use. Of all our box profile sheets, these are preferred by some due to their low profile and superb galvanised steel finish. They're made from a galvanised steel strip and give 1000mm actual width cover when lapped. Galvanised finishes are often favoured for traditional projects where no colour finish is required.

Cladco 32/1000 Box Profile Sheeting gives robust strength with a thickness of 0.7mm. Also known as single-skin Box Profile Sheets, this Sheet incorporate 6 profiles of 200mm pitch and 32mm in height. Each Sheet gives a 1 metre width coverage when lapped. Please note that Polyester Paint Coated Sheets can be easily scratched, so care must be taken when handling/installing.

Insulated Panels are manufactured as a single product with 40mm insulation and a pre-finished Goosewing Grey steel coating for a high-quality finish. Insulated Panels provide heightened noise retention and heat regulation along with fire-resistant benefits.

34/1000 box profile 0.5 thick galvanised roofing sheets are one of our most popular box profile sheets, with each single skin sheet having 7 strong 166mm profiles across its width. With a profile height of 34mm and coverage of 1000mm when installed, these 34/1000 box profile sheets give you a simple yet strong way to cover your build. Each 34/1000 box profile sheet will give your roof a secure weatherproof lap from sheet to sheet.

34/1000 trapezoidal box profile sheeting is our most popular and strongest sheet, with each single skin sheet having 7 strong 166mm profiles across its width. With a profile height of 34mm and coverage of 1000mm when installed, these 34/1000 box profile sheets give you a simple yet strong way to cover your roof.

Each 34/1000 box profile sheet is formed from 1250mm wide steel strip which will give a secure weatherproof lap from sheet to sheet. A polyester paint coat on top of your choice of 0.5 or 0.7mm thick galvanised steel makes this our most cost-effective sheeting solution.

Our 34/1000 box profile 0.5 thick roofing sheets, sometimes referred to as single skin box profile sheets that give robust profile roofing sheets strength. Incorporating 6 profiles of 200mm pitch across the sheet width and 32mm profile height, these are superb roofing sheets for home or commercial use. Some users prefer the appearance of these galvanised box profile sheets as it has lower and fewer profiles. It’s made from a galvanised steel strip and gives 1000mm actual width cover when lapped.

34/1000 box profile 0.7 thick polyester paint coated most popular sheets, with each single skin sheet having 7 strong 166mm profiles across its width. With a profile height of 34mm and coverage of 1000mm when installed, these 34/1000 box profile sheets give you a simple yet strong way to cover your build. Each 34/1000 box profile sheet will give your roof a secure weatherproof lap from sheet to sheet. Click Here to order a sample of our 34/1000 box profile polyester paint coated roof product.

34/1000 Box Profile Sheets are our most popular and strongest profiled Roofing Sheet, with each single-skin Sheet featuring seven profiles across its width. With a profile height of 34mm and a coverage of 1000mm when installed, PVC Plastisol 0.7mm Box Profile Roofing Sheets give a low-maintenance, scratch-resistant covering for your roof.

34/1000 box profile 0.7 thick galvanised roofing sheets each single skin sheet having 7 strong 166mm profiles across its width. With a profile height of 34mm and coverage of 1000mm when installed, these box profile sheets give you a simple yet strong way to cover your build. Each 34/1000 box profile sheet will give your roof a secure weatherproof lap from sheet to sheet.

Cladco 36/1000 Insulated Panels are single-component, insulated composite sheets with a pre-finished Grey steel top sheet. Available in various lengths from 2.5m, 3m and 4m, each Panel offers excellent insulating properties for your building, as well as providing noise reduction and temperature regulation.

Often referred to as tile effect roofing sheets, these roof tile sheets are designed to look like an authentic pan tile roof. Made from the best quality steel available, our metal tile effect sheets really do give the appearance of traditional clay tiles. Using 0.6mm galvanised Swedish Steel, sheets are formed with a tough, hard-wearing Prelaq Mica coating. Flashings are available in the same coating and colours to complete your project.

Please note: These screws are for fixing Corrugated Sheets only

TEK type self-drilling fix screws. For fixing corrugated sheets to Timber. 5/16th hexagonal head with BAZ sealing washer.

Springhead Nails are design to securely fix your Cladco Corrugated Roof Sheets in place. The Nails have a wide disk head and twisted shank to improve holding power by absorbing any  movement that may occur in the construction process. Manufactured from Galvanised Steel, that are also resistant to corrosion.

Cladco 3m 200mm x 200mm Barge Corner Flashings are available in a Galvanised finish. Corner Barge Flashings, sometimes known as verges, are used at the end of a run of sheets to tidy and seal off the edges of a roof. Secure Corner Barge Flashings with 22mm Stitching Screws to the sheets below.

Each 90 degree Corner Flashing can be used at the end of a run of sheets to trim and seal off the edge of a roof. Steel Flashings are a vital part of any roofing or cladding project, helping to improve weatherproofing and aesthetics. Available in a range of colours to match or contrast Tile Form Roofing Sheets. Flashings are installed using 22mm Stitching Screws to the roofing sheets below. Allow a minimum 200mm overlap when fitting Corner Barge Flashings.

Barges, sometimes known as Verges, are used at the end of a run of sheets to trim and seal off the edge of the roof. All flashings are a vital part of any profiled clad roof, they not only help to weatherproof the building but also add to it aesthetically too.

Barges are available in a range of finishes and colours to match or contrast our roofing sheets depending on the look you are after. They are secured by stitching them (Using ST22 Stitching Screws) to the roofing sheet below. You will need to allow an overlap of a minimum 100mm when fitting barges end on end.

Roof Barge boards, sometimes known as Verges, are used at the end of a run of sheets to trim and seal off the edge of the roof. All roof barge flashings are a vital part of any profiled clad roof; they not only help to weatherproof the building but also add to it aesthetically too.

Roof Barge Boards are available in a range of finishes and colours to match or contrast our roofing sheets, depending on the look you are after. They are secured by stitching them (using st22 stitching screws) to the roofing sheet below. You will need to allow an overlap of a minimum 100mm when fitting roof barge boards end on end.

These straight cut tinsnips are ideal to cut your Cladco flashings and sheets. With a hardened blade and serrated edges, they will cut through steel leaving a clean cut. Features include slip-resistant hand grips and lock and slip guards.

Easy to handle and flexible, our Lightweight Tarpaulins are commonly used to provide temporary covering to building supplies, logs and outdoor furniture. You can secure your Tarp into place using our Tarpaulin Ball Bungees. Choose from nine sizes available.

Universal applicator gun for use when you purchase our silicone cartridge. Add this item to you order to avoid against that extra trip to the shops when you can’t find your old one. This gun has a cartridge cleaning pin to help keep the nozzle clear. Made of sturdy metal construction with a moulded handle and nozzle cleaning pin and is designed to carry our 310ml silicone cartridges.

This listing is for new 10ft GRP roof lights / roof sheets to fit Big 6 fibre cement / asbestos profile, made from 1.5mm thickness fiberglass, superb quality CE marked.

This listing is for new 6ft GRP roof lights / roof sheets to fit Big 6 fibre cement / asbestos profile, made from 1.5mm thickness fiberglass, superb quality CE marked.