Cladco – LJT 13/3 Corrugated Profile
Traditional 3 inch/76mm round corrugation giving 3ft 3inch/990mm sheet cover. Available in 0.5mm and 0.7mm sheet thickness, Polyester paint finish or PVC Plastisol coated in a choice of colours as well as plain galvanised, also available with “Dripstop” anti-condensation membrane on reverse.
This traditional corrugated iron profile has been used for over a century.
Uses:
Industrial, agricultural, commercial and domestic roofing and cladding. Can be used as single skin sheeting and cladding, over clad of an existing roof or part of a built up, insulated system.
Benefits:
- Robust cost effective sheeting giving a traditional look.
- Light in weight
- Fast and easy to fit
- Available in range of traditional colours
Specification:
- Application: Roof or Wall (Horizontal or Vertical)
- External Finish: PVC Plastisol, Polyester paint or Galvanised
- Internal Finish: Grey Polyester or Galvanised
- External Face: Corrugated 13/3 profile (13 profiles of 3 inches when lapped), 18mm profile height, 76mm pitch
- Standard Width: 990mm when lapped
- Max Length: 8000mm
- Minimum pitch: 10 degrees
- Gauge Thickness: 0.5mm and 0.7mm
- Weight: 0.5mm thickness – 4.78kg/m2, 0.7mm thickness – 6.22kg/m2
NOTE: When used in roof applications, construction can be safely undertaken down to a 10 degree pitch using conventional nail fasteners on top of profile.
Rooflights and flashing complete the system, offering cost effective traditional sheet cladding.
|
 |
|
